Flexible Arm Tapping Machine (Servo, M3–M36)

The Programmable Servo Based Flexible Arm Universal Tapping Machine – usually called a flexible arm tapping machine – makes internal threads in drilled holes quickly and safely. The tapping head sits on a long flexible arm, so the operator moves the tap from hole to hole by hand instead of moving the workpiece. A servo motor controls speed and torque, and the machine reverses the tap out of the hole automatically.

Flexible arm tapping machine on workbench

What Is Tapping?

Tapping cuts a thread inside a hole so that a bolt or screw can be fitted. First a hole slightly smaller than the bolt is drilled, then a tap (the thread-cutting tool) is turned into it. Doing this by hand is slow and tiring; the flexible arm tapping machine does it in seconds.

Models and Specifications

M16 ModelM24 ModelM36 Model
Tap sizeM3 – M16M6 – M24M6 – M36
Power220 V, 1500 W220 V, 2000 W220 V, 2000 W
Spindle speed1–600 RPM1–300 RPM1–150 RPM
Arm reach (horizontal)1200 mm1200 mm1200 mm
Vertical travel420 mm450 mm450 mm
Tapping directionVertical / HorizontalVertical / HorizontalVertical / Horizontal
Packing size71 × 69 × 23 cm86 × 76 × 29 cm87 × 78 × 29 cm
Weight (packed)30 kg50 kg52 kg
PriceCall 9310620946Call 9310620946Call 9310620946

All models include one set of tap chucks (ISO, DIN or JIS – your choice), wooden box packing and an English touch-screen display.

How the Machine Works

  • Flexible arm – reaches up to 1200 mm (about 4 ft), so many holes on one workpiece can be tapped without re-clamping it.
  • Universal head – rotates for vertical and horizontal tapping, so top and side holes are done on the same machine.
  • Servo motor – precise control of speed and torque; a torque limit protects the tap from breaking.
  • Automatic reverse – once the set depth is reached, the machine reverses the tap out of the hole by itself.
  • Slip-protected tap chuck – slips if the tap hits the bottom of a blind hole, so the tap does not snap.
  • Programmable touch screen – set depth, RPM and torque, and save settings for repeat jobs.
  • Adjustable stand – bolts to the work table; height can be adjusted.

Benefits

  • Faster than hand tapping or drilling-machine tapping
  • Less tap breakage thanks to torque control and slip chuck
  • Consistent thread depth on every hole
  • Less operator fatigue – the arm carries the weight
  • One machine for vertical and horizontal holes

Which Model Should I Choose?

Choose by the largest tap you use: up to M16 – M16 model; up to M24 – M24 model; above M24 – M36 model. Bigger taps need lower speed and more torque, which is why the M36 runs up to 150 RPM and the M16 up to 600 RPM.

Workbench for Tapping Machine

A matching workbench for the flexible arm tapping machine is also available. Call 9310620946 for workbench price and options.

Workbench for flexible arm tapping machine

FAQ

What power supply is needed?

Normal 220 V single-phase supply. The M16 model uses 1500 W; the M24 and M36 use 2000 W.

Are tap chucks included?

Yes, one set of tap chucks is included. Choose ISO, DIN or JIS standard.

Can it tap horizontally?

Yes. The universal head rotates for both vertical and horizontal tapping.

How does it protect the tap?

Two ways: a torque limit set on the touch screen, and a tap chuck that slips if torque gets too high.

Can the display language be changed?

The display is in English; it can be customised on request.

Call / WhatsApp: 9310620946 for price and a live demo at our Mundka, New Delhi office.

Related Products