2 kW 4020 Fiber Laser Cutting Machine (4000 × 2000 mm)

The 2 kW 4020 fiber laser cutting machine pairs a 2 kW laser source with a 4000 × 2000 mm bed (about 13 × 6.5 ft). It cuts mild steel up to 14 mm and stainless steel up to 8 mm, and takes sheets up to 4 × 2 m, and more parts nested per sheet.

2 kW 4020 – Specifications

ItemDetails
Laser power2 kW
Bed / working area4020 – 4000 × 2000 mm (about 13 × 6.5 ft)
Max cutting – mild steel14 mm
Max cutting – stainless steel8 mm
Laser sourceRaycus or MAX Photonics
ControllerCypcut or Bochu (FSCUT)
Body optionsOpen table, exchange table, fully enclosed, plate + tube
PriceCall 9212300300 for a quotation

Why Choose 2 kW with the 4020 Bed?

Choose this when your material is mostly thin but your sheets or parts are large — for example signage, panels or furniture. You get the bigger 4020 table without paying for power you will not use.

Main advantage of 2 kW: noticeably faster than 1.5 kW on 3–8 mm sheet while keeping electricity and gas costs low. Main advantage of the 4020 bed: it takes sheets up to 4 × 2 m, and more parts nested per sheet — a good balance of bigger sheets and moderate floor space.

Typical Jobs

Customers buy the 2 kW 4020 for SS kitchen and hotel equipment, control panels, almirah and furniture parts, MS brackets and flanges. It is popular with panel, enclosure, signage and furniture manufacturers.

Compare with Nearby Models

ModelMS / SS maxBest for
1.5 kW 402012 / 6 mmLower cost, thinner work
2 kW 4020 (this page)14 / 8 mmgrowing fabrication units and small job-work shops
3 kW 402016 / 10 mmThicker plate, more speed

Same 2 kW power on other beds: 2 kW 3015 (3000 × 1500 mm).

FAQ

What is the maximum thickness a 2 kW 4020 laser can cut?

Up to 14 mm mild steel and 8 mm stainless steel. Edge quality and speed depend on assist gas and settings.

What sheet size fits the 4020 bed?

The working area is 4000 × 2000 mm (about 13 × 6.5 ft), so it takes sheets up to 4 × 2 m, and more parts nested per sheet.

Should I choose 3 kW instead of 2 kW?

Choose 3 kW if you often cut above 14 mm MS or need more speed on medium plate; otherwise 2 kW costs less to buy and run.

Is an exchange table or enclosed body available?

Yes. The 2 kW 4020 is available as an open table, exchange (double) pallet, fully enclosed body or plate + tube combo.

More: 2 kW laser cutting machine · 4020 bed size · all metal laser cutting machines

Call / WhatsApp: 9212300300 for price, a cutting sample, or a demo at our Mundka, New Delhi office.